The information for PCs and Ethernet network components is provided via the SNMP OPC server. SIMATIC Asset Management With SIMATIC, maintenance and diagnostics statuses of the hardware components (assets) in use are displayed in a faceplate with different views of the respective components.SIMATIC PCS7 Process Control System When using PCS7 applications (V6.0 +SP3 and higher), the SNMP variables and message texts can be automatically generated in WinCC with the SNMP Mapper (component of STEP 7).Supported HMI and process control systems SIMATIC HMI systems - WinCC (V5.x and higher) - WinCC flexible - Protool Pro RT.Firewall-friendly Data can also be exchanged over the Internet.Clients independent of the operating system Allows non-Windows OPC clients to be connected.OPC interface (client/server) OPC DA OPC A&E OPC XML-DA.OPC server Configuration of the OPC server is integrated in the STEP 7 Hardware Configuration application.The SIEMENS products with SNMP functionality listed below have been tested explicitly: SCALANCE X, W, OSM, ESM WinAC/LC with SIMATIC NET CP SIMATIC S7 300/400 CPs and CPUs PROFINET devices, such as ET200 S Protocols and interfaces The data from any SNMP devices (SNMP V1) is presented at the OPC interfaces.The SIMATIC NET SNMP OPC server also provides detection of PROFINET devices using the DCP protocol. Fast online configuring through 'Autodiscovery' In STEP7 V5.3+SP3 and higher, all Ethernet devices can be detected by means of their IP address and/or the SNMP protocol (SNMP V1) and transferred to the configuration.As an alternative to STEP 7, the NCM PC (included on the SIMATIC NET CD) can also be used to perform the configuration. Already configured S7 modules from the STEP 7 project can be transferred directly. Integrated into STEP 7 Configuration of the OPC server is integrated in the STEP 7 Hardware Configuration application.Configuring in 6 languages English, German, French, Italian, Spanish, Chinese.
0 kommentar(er)
